Your location: Products >>Pneumatic valve>> Pneumatic O-cut ball valve
Pneumatic O-cut ball valve
Product Type: Q641F / H / Y
Nominal diameter: DN15 ~ 300mm
Nominal pressure: PN1.6 ~ 6.4Mpa
Suitable temperature: -28 ¡æ ~ 300 ¡æ
Body material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti
Design and manufacturing: GB12237-89, API608, API 6D, JPI 7S-48, BS5351, DIN3357
Flange dimensions: JB / T74 ~ 90 (JB74 ~ 90), GB9112 ~ 9131, HGJ44 ~ 76, SH3406, ANSI B16.5, JIS B2212 ~ 2214, NF E29-211, DIN2543
Structural Length: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202
Product details

O-pneumatic cut off the ball SUMMARY
Pneumatic O type cut off the ball pneumatic actuator using the new AT / GT Series pneumatic actuators, the structure of the State utility model patents, double-acting and single-acting (spring return), the gear rack structure Transmission, more secure and reliable performance.

First, the pneumatic O-cut off the ball valve Introduction
Pneumatic O-cut off pneumatic valve pneumatic actuator using the new AT / GT series of pneumatic actuators, the structure of the state utility model patents, a double-acting and single-acting (spring reset), the use of rack and pinion Structural transmission, more secure and reliable performance; large-diameter valve with AW series of pneumatic actuators, fork structure transmission, reasonable structure, large output torque.
Pneumatic O-cut ball valve with a second shut off the ball valve, with explosion-proof device, available gas cut off. It is composed of ball valve and single acting piston pneumatic actuator. It is widely used in industries such as natural gas, oil, chemical, metallurgy, paper-making, mining, printing and dyeing, biopharmaceutical, daily chemicals, food and beverage, water treatment and air treatment Fluid cut off control, and supporting the use of automated pneumatic instruments.

Second, the pneumatic O-cut off the ball valve works
Pneumatic O-cut ball valve by the body, ball, valve shaft, seal ring, packing, platen and other components. Actuators from the gas, piston, gear type, output shaft, cylinder head, bearings, guide ring, piston bush, adjusting bolts, "O" ring and other major components. Actuator and valve connection shaft. Cylinder input pressure, the role of the piston to produce a certain thrust, the gear-type output driven by the piston, the gear output shaft in rotation, driven by the rotation of the valve shaft, so that the valve ball with the rotation of the valve, change the valve Flow area, to achieve the purpose of changing the medium flow through the valve.

Third, the pneumatic O-cut ball valve Features
1, thrust bearing to reduce stem friction torque, stem long-term operation can be smooth and flexible.
2, seat sealing performance, using PTFE and other elastic materials made of seals.
3, anti-static function: In the sphere, the valve stem, the spring between the body, the process can switch the static electricity derived.
4, the stem seal is reliable, as the stem only for rotational movement without lifting movements, stem packing seal is not easy to damage.
5, due to PTFE and other materials with good self-lubricating, and friction loss of the ball is small, so the long service life of the ball valve.
6, cut off fast, with one second cut off capacity, and good sealing performance, explosion-proof device can be equipped with gas pipe can be cut off.

Fourth, pneumatic O-cut ball valve components and materials

Serial
number
Part Name Serial
number
Part Name Serial
number
Part Name Serial
number
Part Name Serial
number
Part Name
1 Body 4 Nut 7 Gasket 10 Positioning pieces 13 Valve stem
2 Sealing ring 5 Stud 8 filler 11 Ring 14 Screw
3 Sphere 6 Stone body 9 Packing gland 12 handle 15 Thrust washer


Fifth, pneumatic O-cut ball valve performance parameters

Test pressure
(Mpa)
Nominal pressure (Mpa) Pressure class JIS (Mpa)
1.6 2.5 4.0 6.4 10.0 150 300 600 10K 20K
Strength test 2.4 3.8 6.0 9.6 15.0 3.1 7.8 15.3 2.4 3.8
Seal test 1.8 2.8 4.4 7.0 11.0 2.2 5.6 11.2 1.5 2.8
Airtight test 0.5 ~ 0.7


Six, pneumatic O-cut ball valve technical parameters

Nominal diameter mm DN15-DN300
Material code C P R
The main parts Body WCB ZG1Cr18Ni9Ti ZG1Cr18Ni
12Mo2Ti
Sphere 2Cr13 1Cr18Ni9Ti 1Cr18Ni12MoTi
Valve stem 2Cr13 1Cr18Ni9Ti 1Cr18Ni12MoTi
Sealing ring Enhanced polytetrafluoroethylene para-benzene
Filler Polytetrafluoroethylene flexible graphite
Applicable conditions Suitable
media
Steam, water Nitric acids Acetic acid
Suitable
temperature
-28 ¡ã C - 300 ¡ã C
Actuator Model AW, DA / SR series, GTE series, TH series and so on
Air pressure 0.4-0.7MPa



Seven, install the size table

The previous£º Pneumatic V-type ball valve