Your location: Products >>Marine butterfly valve>> Marine screw wafer butterfly valve
Marine screw wafer butterfly valve
Product model: GB / T3036-1994
Nominal diameter: DN50 ¡« 350mm
Nominal pressure: PN0.6 ~ 1.6Mpa
Applicable media: air, sea water, steam, gas, oil, etc
Applicable temperature: ¡Ü 80 ¡æ
Working temperature: ¡Ü 80 ¡æ
Connection type: clamp
Main materials: WCB, zg1cr18ni9ti, zg1cr18ni12mo2ti, zg00cr17ni14mo2
Design standard: GB / T3036-1994
Flange connection size: GB / T9113.1-2000; GB / T9113.2-2000; GB / T9115.1-2000; GB / T9115.2-2000
Pressure test: GB / T 13927-1992; JB / T 9092-1999
Product details

USES and features

Marine screw clamping butterfly valve GB/ t3036-94 is suitable for regulating flow rate and stopping medium in water supply and drainage and gas pipeline of ship, medicine, chemical industry, petroleum, electric power, light textile, paper making, etc., and has the function of compensating hot expansion and cold contraction of pipeline.


Its main features are:

Novel design, reasonable, light weight, easy to operate, quick opening and closing;

In addition to the function of regulating and intercepting the flow, Marine helical butterfly valve can compensate the thermal expansion and cold contraction caused by the temperature difference in the pipeline, but also can provide convenience for installation, replacement and maintenance;

The sealing part can be adjusted and replaced, and the sealing performance is reliable.


With a standard

Design standard: GB/ t3036-1994

Flange connection dimensions: GB/ t9113.1-2000;GB/T9113.2-2000;GB/T9115.1-2000;GB/T9115.2-2000

Pressure test: GB/T 13927-1992;JB/T 9092-1999

Marine spiral wafer butterfly GB/T3036-1994, the production standard: GB/CB, JIS, ANSI, DIN, nominal pressure: 5 k, 10 k, 16 k, PN, 6 pn1, 0 pn16, ANSI150, LB300LB, nominal size (48 "), the valve body material: ductile iron QT450, cast steel, stainless steel SUS ZG230-450, bronze BZ, valve plate: SUS stainless steel, bronze BZ, seat: nitrile butadiene rubber, NBR, teflon:PTFE, EPDM, FKM.


Main technical parameters

Nominal diameter DN 50¡«2000
Nominal pressure PN 0.6 1.0 1.6
Test pressure Strength experiment 0.9 1.5 2.4
Sealing experiment 0.66 1.1 1.76
Airtight seal test 0.6 0.6 0.6
Service temperature ¡Ü80¡æ
Adaptive media Air, sea water, steam, gas, oil, etc
Driving form Manual, worm and worm gear drive, air drive, electric drive


Material of main parts

Part name Material
The body Cast iron, cast steel, stainless steel chromium, molybdenum steel, alloy steel
Disc Cast steel, alloy steel, stainless steel, chrome molybdenum steel
Seal ring Rubber, polytetrafluoroethylene, polyurethane, stainless steel
Stem 2Cr13, stainless steel, chrome molybdenum steel
Telescopic tube Cast iron, cast steel, stainless steel, chrome molybdenum steel
Packing Flexible graphite